Audio Freezer keeps your USB DAC (or any audio device) locked to the sample rate you choose, re-applying it automatically whenever the device reconnects or macOS resets it. If you need help, we are happy to assist.
Email contact@zerostorypoints.com and we will get back to you. Please include your macOS version and, if relevant, the audio device (DAC) you are using.
macOS 13 (Ventura) or later. Works with any Core Audio output device.
macOS does not reliably remember the sample rate of USB DACs. When the device powers up, reconnects, or the Mac wakes, Core Audio snaps it back to a default such as 44.1 or 48 kHz. Audio Freezer watches for this and immediately sets the rate back to the one you chose.
Audio Freezer is free for 7 days from the day you install it. After that, a one-time unlock keeps device management running. The app stays usable either way; only the automatic rate and volume management pauses until you unlock.
Purchases and refunds are handled by Apple. You can request a refund at reportaproblem.apple.com.
No. Many USB DACs and amplifiers use a hardware volume knob and expose no software volume to macOS. Audio Freezer correctly shows these as hardware-controlled, which keeps playback bit-perfect.
That's expected, not a failure. Some players — Qobuz is the best-known — change your DAC's sample rate to match each track so the audio reaches it without resampling. Every rate change makes a DAC re-lock, which clicks audibly on many units, so while audio is streaming Audio Freezer lets the player keep the rate it asked for instead of fighting it. The 🔒 marks that deliberate hold, and the menu spells it out: "Rate set by the player". A few seconds after playback stops, the frozen rate is restored and the ✓ returns (⚠︎ is reserved for genuine mismatches). If you'd rather have the rate snap back instantly even mid-stream, turn off Settings → General → "Wait for playback to end before re-freezing".
The click is your DAC's hardware mute relay re-locking when the sample rate changes — it happens inside the DAC, and no software can buffer it away (Audio Freezer is not in the audio path; that's what keeps playback bit-perfect). You have two options. Keep your player's automatic rate switching and accept one click per rate change — that's the price of native-rate, resampling-free playback. Or turn rate switching off in the player (in Qobuz: the audio device settings) so the device stays at its frozen rate — zero clicks, with macOS resampling everything to that rate. Spotify users never hear clicks because Spotify always plays 44.1 kHz and never touches the device rate.
Both. The menu's Measured value is your DAC's clock rate as reported by its own driver — the rate the hardware is really running at. A streaming app's "up to …" line describes the service's ceiling (Qobuz's catalog tops out at 24-bit/192 kHz), not your DAC's. A DAC that accepts 768 kHz will happily run at 768 kHz while the app streams 44.1 kHz into it — macOS resamples in between.
A one-click switcher for the system default output — the same thing as the Sound menu, without leaving Audio Freezer. Click a device and macOS routes audio to it; the checkmark marks the current default, and the Monitoring readout follows your choice. The section appears when more than one output device is connected.
Yes. In the device's settings, turn on "Make default output when connected". Whenever that DAC reconnects or Audio Freezer starts, it becomes the system output. Picking another output afterwards is respected until the next reconnect.
Yes. In the device's settings, click Rename and type a name. It is used everywhere in the app; the original name stays visible under the title. Reset, or clearing the field, brings the original back.
Settings → Activity is the record of what Audio Freezer did: each sample-rate restore, each volume pulled down to its limit, each time your preferred DAC was made the default output. The chart shows the last 30 days, split by what caused the correction — a reconnect, another app resetting the rate, or a re-freeze after playback ended. History is kept for 90 days. Nothing leaves your Mac.
During the 7-day trial, rate corrections, output switches and volume limits post a macOS notification so you can see the app working in the background. After you unlock, they stop. If you'd like to keep them, turn on "Notify when a device is corrected" in Settings → General. Notifications are capped at one per device per minute.
Yes. Apple Music on the Mac never changes your DAC's rate, so every track is resampled to whatever the DAC is set to. In the device's settings, turn on "Match source sample rate (Apple Music)" (also in the menu's rate submenu). Each Music track then plays at its own rate, or the closest one your DAC supports: a 176.4 kHz track on a 96 kHz DAC plays at 88.2 kHz, the cleaner 2:1 step. The rate is kept while Music is open, so pausing never makes the DAC re-lock. Before the first track, and after you quit Music, the device's target rate (Highest or the one you pinned) applies.
Only when the next track has a different sample rate. Changing the rate makes the DAC re-lock, which clicks on many units and would cut the start of the track. So Audio Freezer pauses Music, switches the DAC, waits until it has re-locked, and starts the track again from the beginning. Tracks at the same rate, which is most of an album, play straight through.
Reading the current track's sample rate and pausing playback for the switch need macOS's Automation permission for Music. Audio Freezer asks only after you turn the option on, never opens Music by itself, and reads only what it needs from the current track. If you declined, turn it on in System Settings → Privacy & Security → Automation → Audio Freezer → Music.
Matching is for Apple Music: it is the only player that tells other apps the current track's rate. The others don't need it. Qobuz and TIDAL (with its Exclusive Mode) set the DAC rate themselves, and Audio Freezer lets them; the menu says "Rate set by the player" while they do. Spotify streams everything at 44.1 kHz, so pinning the device to 44.1 kHz removes resampling for it.
It shows where the audio on your DAC comes from. On macOS 14 or later Audio Freezer names the apps playing into the device, for example "♫ Qobuz" or "♫ Apple Music, Safari". With "Match source sample rate (Apple Music)" on, an Apple Music track also shows its rate and whether it reaches the DAC unchanged: "♫ Apple Music: 96 kHz · Hi-Res Lossless · same rate, no resampling", or "→ resampled to 96 kHz" when macOS converts it. Only the rate is compared: Music doesn't report a track's bit depth, and the 24-bit shown for the DAC is the device format. When several apps play at once, only the names are shown, because the DAC then plays a mix.
The Apple Music track's sample rate, shown when your DAC can't play that rate, so the track is resampled to the rate in the format badge next to it. "H" marks Hi-Res Lossless (above 48 kHz). When the DAC plays the track at its own rate the badge already shows it, so nothing extra appears. It needs Match source on and can be turned off in Settings → General → "Show Apple Music source in menu bar".
Apple Music doesn't tell other apps which of the two it is streaming; we checked, and the values it reports don't separate them reliably. Above 48 kHz the track can only be Hi-Res Lossless, so that label is certain.
Another app changed your DAC's sample rate, here Qobuz switching to the track's rate. Audio Freezer records it so you can see who changed what; it is not a correction and is not counted or notified. A player that switches on every track gets one line per listening session.
Settings → General → "Email diagnostic report…" opens a new email to us in your mail app with the report already in it: your Mac and app version, each device's settings and sample rates, what Apple Music reported, and the recent log. Add a line about what happened and send it. "Copy diagnostic report" puts the same text on the clipboard if you'd rather paste it elsewhere. The report never includes track names, and nothing is sent unless you send the email yourself.
Settings → License → "Redeem code…" (macOS 15 or later), or in the App Store app: your account → Redeem Gift Card or Code. The unlock applies as soon as the code is accepted. On macOS 13 and 14 offer codes can't be redeemed.
Settings → How it works has a short in-app guide (freezing, rate changes during playback, Apple Music, output, names, activity, the menu readout, volume). The fuller story is on this page and in the App Store description.